Chinese
WIRE CUT EDM MACHINE （OPTIONAL AC SERVO TYPE)
BH-500
T type mechanical structure
Contact Us
MODEL UNIT BH-320 BH-400 BH-500 BH-630
Working Table Size mm 760×520 850×600 1000×750 1170×830
Working Table Travel mm 400×320 500×400 630×500 800×630
Max. cut thickness mm 250 250 300 300
Max.capacity loading kg 300 500 800 1000
Max.Cutting Speed mm²／min 180
Max.current A 8
Process roughness(Ra.) Ra(um) One Cut≤2.3um、Second Cut≤1.6um Third Cut ≤1.0um
Cutting Accuracy mm Straight line  0.005    Octagonal  0.01
Jump Accuracy 0.01mm/0-200mm、0.015/0-350mm、0.02mm/0-500mm
Machine taper mm ±3°/80（ Optional ±10°/50)
Wire diameter range mm 0.12-0.25（Standard 0.18）
Motor drive system / X,Y STEP MOTOR（OPTIONAL:AC SERVO MOTOR)
Water Tank / High Pressure WEDM-LS filter  Volume 100L
Working liquid Water Based Liquid
Consumed Power KW ≤3.5
Power supply / 380V/50HZ/3PH
Machine weight Kg 1860kg 2160kg 2750kg 3450kg
Machine dimension mm 1570×1100×1700 1600×1220×1700 1850×1400×1800 2070×1655×2060
Outside dimension mm 1720×1300×1800 1850×1420×1800 2050×1600×1900 2340×2100×2160
RETURN

High Quality Wire Cut EDM Features:

1、 T type mechanical structure

2、 Automatic tightening system

3、 High efficiency and low consumption digital high frequency

4、 Max cutting speed 200mm²/min,

5、 Each 400, 000mm² wear 0.01mm diameter wire

6、 Best Roughness ≤0.8μm

7、 Standard installed Taiwan Linear Guide、ball screws

8、Step Control WEDM Cabinet（Optional AC Servo Control Cabinet）

RETURN
RETURN